Half Round Oscillating Saw Blade Fits Sonicrafter Worx

Half Round Oscillating Saw Blade Fits Sonicrafter Worx

CODE: SON-133

US $11.80

In stock

3-1/8" Oscillating Multi Function Saw Blades Fits Sonicrafter Worx

 

3-1/8” Semi Circular Segment Saw Blade, High Speed M2 Steel, Wood and Metal Cutting Blade

 

3" Half round Saw Blade for plastics, fiberglass, wood, putty, non-ferrous metals and sheet metal up to 1mm.  For linear and plunge cutting. Flat on one side so you can cut into corners and flush against adjoining surfaces. The semi-circular design allows the blade to cut into corners and 90 degree angles without making unsightly over cuts.

  • 20 Teeth Per Inch                       (SON-133)
  • 1-1/4 Inch Cutting Depth, Width: 3 Inch, 0.020 Inch Thick
  • Overcut Protection

For best performance:

For best results, put very little pressure on the material to be cut and move the tool rapidly from on side of the blade to the other side, this way you will be using the greater possible number of teeth.

When the tool is left stationary and big pressure is exerted on the blade, the few teeth that are used to cut do wear out quickly and the blade can become dull.

This Blade Arbor Hole System is compatible with the following brand:

Sonicrafter™ Worx

This blade is manufactured for Kent who is not affiliated with Sonicrafter.

Sonicrafter and all brand names and trademarks mentioned in this site belong to their respective owners and are not related to Kent Services or Kent Supplies.

Type the characters you see in the picture above.

None
Loading...